Resume Of Industrial Projects

Brickworks in Gloucestershire

• A second-hand dryer was supplied to dry soft mud clay bricks in 24 hours, previously the bricks took 5 days to dry. The installation of this dryer reduced the customer’s gas consumption by 50% and the payback time was 12 months.
• The above dryer was subsequently extended to double the capacity and made into 2 zone control.
• Re-commissioning of gas kiln. After the work had been completed the temperature uniformity was improved which allowed the customer to reduce the firing cycle and gave better quality production.
• Pressure control dampers installed on an updraught gas kiln. After the installation the gas consumption was reduced by 15%.

Roof and Cladding Tile Manufacturer in Bangladesh

• Two gas firing intermittent kilns exported from the USA refurbished and commissioned by Jariston.

Foundry in North Devon

• A new fibre lining and improved control system was installed on a rotary furnace which allowed better control of organics burnt out of moulds.

Sanitaryware factory in County Durham

• Complete dismantling and relocation of factory equipment.

Sanitaryware factory in Stoke-on-Trent

• The hydraulic kiln car pusher system was replaced on two tunnel kilns. The new system is PLC controlled with linear encoders. The pushing time accuracy now is ± 2 seconds.

Earthenware factory in Stoke-on-Trent

• The automation system on a tunnel kiln was upgraded so it would operate faster, thus increasing production volume.

Sanitaryware factory in Yorkshire

• New stainless steel exhaust stacks installed on 2 intermittent kilns.
• Upgraded control system on ware dryers and casting shop heating system.
• Relocation of gas-fired intermittent kiln.

Tableware factory in Staffordshire

• Installation of a new fibre lining, brickwork and heating elements to a moving hood electric kiln.

Commissioning

• New and old intermittent and tunnel kilns, curing ovens, afterburners and dryers commissioned or re-commissioned at many different factories throughout the world.

SCADA Systems

• Supervisiory Control and Data Acquisition systems installed and maintained on various types of heat process equipment.